Model | Q6 Edge® HD |
Drive Configuration | Mid-wheel Drive |
Drive Wheels14" flat free | Optional: 14" Pneumatic, 14" Knobby |
Caster WheelsFront: 6" Solid | Rear: 6" Solid |
Anti-Tip WheelsN/A | |
Maximum Speed4Up to 4.7 mph | |
Ground Clearance3" (frame center) | |
Turning Radius519.75" | |
Overall Length1135.6" | |
Base Width26.25" | |
Seating SizesTRU Balance® 3 HD | Synergy®: W: 20-32" D: 20-28" Static: W: 20-32" D: 20-28" Power Tilt: W: 20-32" D: 20-25" Lift & Tilt: W: 20-24" D: 20-24" |
Seat-to-Floor Heights16,17TRU Balance® 3 HD | Synergy®/Static8: 16.5-18.5" Power Tilt8: 18.5-20.5" Lift & Tilt8: 18.5-20.5" |
Battery Size6Group 24 | |
Battery Weight1452 lbs. | |
Available Electronics12
120A Q-Logic 3 EX | 120A Q-Logic 3e 75A Q-Logic NE 75A Q-Logic NE+ |
Battery Charger8A Off-board | |
Motor Packages4-Pole 4.7 mph1 | |
Weight Capacity7450 lbs.15, 16 | |
Base Weight143.5 lbs. | |
Medicare Code CoverageGroup 3: | Heavy Duty (K0850/K0851) Single Power HD (K0858) Multiple Power HD (K0862) |
Notes: 1 Standard 4 Speed varies with user weight, terrain type, battery charge, battery condition and tire pressure. 5 Without front riggings 6 Battery capacity may change when adding power positioning systems. 7 Weight capacity is dictated by the selection of seating. 8 All measurements +/- 1/8" with 18" x 18" seat, fixed towers, 300 lbs. weight capacity and solid tires (add 3/8" with pneumatic tires). Depths may increase seat-to-floor height. Contact Customer Service for details. Limited measurements are in the lowest position; does not include elevating system unless specified. 10 A minimum seating size of 20" x 20" is required with iLevel® on the Q6 Edge® HD; maximum seating size is 24" x 25". 11 Without foot riggings 12 All Quantum Rehab® units can be ordered with specialty controls 14 Battery weight may vary +/- 3 lbs. based on manufacturer. 15 Weight capacity is reduced to 400 lbs. with the iLevel® power adjustable seat height. 16 Seat-to-floor heights are measured with the unit unloaded. |
The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice.